Fit-out cleaning contractors in Tokyo
Final cleaning for offices, shops and restaurants after fit-out works, so the tenant can take over a clean space on the agreed date.
Why a fit-out needs its own kind of final clean
A fit-out leaves a different mess from a new building. Partitions have been cut and fixed inside an existing shell, ceilings have been opened and closed, floor coverings have been laid, and the tenant’s fixtures arrive while others are still working. The dust is fine, it travels, and it settles on glazing, desks, shelves and the tops of partitions. A cleaning crew that understands this order of events leaves the space ready for the tenant’s own move-in, not just visibly swept.
Surfaces we deal with in an interior
Glass partitions and shopfront glazing carry protective film and fingerprints; metal frames and sills hold plaster and board dust; counters, shelving and built-in cabinets collect fine dust inside and out; sanitary fittings and pantry areas carry labels and curing tape. Our crew removes construction dust and fine dust from these surfaces, takes off film, tape, stickers and labels, wipes fresh sealant or silicone smudges and light paint splatter from glass, tile and fixtures with surface-safe methods, and cleans pantries, washrooms and toilets.
Floors, vents and finishing pass
Floors are swept, vacuumed and damp-mopped, with attention to edges, door tracks and corners where dust gathers. Vents and grilles are wiped on the surface only; we do not clean ducts. Light debris and offcuts are collected into bags for your own disposal route. The visit ends with a detail pass against a checklist, so that the space is checked in the same order your own handover inspection will follow.
Quoted per project
Send the drawings, the floor area or photos, and tell us whether the space is an open-plan office, a retail unit or a restaurant with a kitchen. We reply with a fixed price per project and the list of areas it covers. The price is confirmed before the visit. If the tenant adds a room or the landlord releases another floor, we quote the addition separately.
Fitting around your trades and the tenant’s date
The final stage of a fit-out is crowded. Electricians finish fixtures, signage installers arrive and the tenant’s own staff may begin to bring in furniture. Tell us which areas are closed and which are free, and we clean in the order that avoids undoing our own work. Standard visits are between 9:00 and 17:00; if the building restricts working times, or the tenant needs the space cleaned outside business hours, we agree the timing by message.
Buildings with their own rules
Many Tokyo office buildings and commercial complexes have rules about deliveries, lift use, waste routes and notice to the management office. We ask for these at the start, follow them, and work with whoever coordinates access for you. We do not guess at a building’s rules: if something is unclear we ask, so that your project is not delayed by a complaint from the building.
What we leave to others
We do not strip and seal floors, use floor polishing machines, clean HVAC ducts, haul industrial waste, work on exterior high-rise facades, remove cured paint or adhesive damage, repair scratches or handle biohazards. We do not promise to remove damage that is part of the surface. If a finish is already marked, we tell you rather than rub it. That honesty lets you decide whether a touch-up trade needs to return before handover.
Contact, coverage and terms
We cover the 23 wards of Tokyo and Kanagawa, Saitama, Chiba, Ibaraki, Tochigi and Gunma, with travel stated before the booking is final outside the 23 wards. Requests can be sent at any hour and we answer within one hour in English or Japanese. Companies are invoiced; credit card, bank transfer, PayPay and cash are accepted. If you cancel less than 24 hours before the visit, 50% applies.
Glass partitions and shopfronts
Fit-outs lean heavily on glass: office partitions, meeting-room fronts, shop windows and display cases. Each carries protective film, fingerprints from installers and spots from sealant or silicone. We take off film and tape, wipe fresh sealant smudges with surface-safe methods and clean both faces of the glass and the frames. We work from the cleaner side toward the dustier side so that dust is not carried back onto finished panes. Tall or fixed panels that cannot be reached safely from the floor are discussed with you before the visit, not on the day.
Restaurants, clinics and shops
A restaurant fit-out ends with stainless steel, tile and sealed joints that need careful wiping. A clinic ends with washbasins, cabinets and floors that the tenant will inspect closely. A retail unit ends with display fixtures and lighting that the brand cares about. Tell us the sector and any brand standards, and we adjust the order of work and the care taken. We clean what is installed; we do not clean exhaust ducts, and we do not operate or test equipment.
Handing over to the tenant
At the end of the fit-out the tenant or landlord inspects the unit against the contract. We provide the checklist and photos in a form your project manager can attach to the handover pack. If the tenant raises a cleaning point at the inspection, send it to us by message with a photo within 24 hours and we re-clean at no extra cost. Points that are defects rather than dirt are reported separately so that the right trade can return.
How do I book a cleaner?
Choose a service
Pick a plan and see the fixed price.
Pick a date
At least 24 hours ahead, between 9:00 and 17:00.
We confirm
We reply by email, normally within 1 hour.
We clean
Your cleaner arrives with supplies and the agreed checklist.
Frequently asked questions
Can you clean outside business hours in an occupied building?
Out-of-hours work can be agreed by message, subject to the building’s own rules on access and noise.
Do you clean restaurant kitchens after a fit-out?
We clean kitchen surfaces, fixtures and floors after the works. We do not clean exhaust ducts.
What do you need for a quote?
Drawings, floor area or photos, and the type of space. We reply within one hour with a fixed price.
Can you remove film from large glass panels?
Yes, we take off protective film and tape from glass and frames, and tell you if a panel is already marked.
Price shown upfront. Book in 2 minutes, reply within 1 hour
Fixed priceTeam + supervisorEnglish and Japanese
Ready to book? Check availability
Inquiries and reservations are accepted 24 hours a day. When you submit, we check availability, assign a cleaner and contact you within 1 hour.
Prefer to talk? LINE · WhatsApp · hello@estreet.jp